Model 300 OEM Chassis Drive

This compact, 3 amps DC drive is designed to fit directly into a machine control panel by a single fixing point. Simple installation and very small size are of great benefit to OEM’s where space is limited.

• Built-in speed potentiometer and dial
• Maximum and minimum speed settings
• Current limit
• Suitable 110 or 230 volts, single phase, 50 or 60Hz configurable
• For use with permanent magnet motors: 1/4hp at 90V, 1/2hp at 180V

Dimensions: 3.4″H x 3.4″W x 1.5″D (86 x 86 x 36 mm)

Approvals: CE

Model 370 OEM Chassis Drive

This general purpose, 3.7 amps DC drive comes with numerous valuable features:

• Armature voltage or tach feedback with IR compensation
• Adjustable max & min speed, current limit acceleration ramp
• Power fuse
• Power on indicator
• Dual supply voltage 110 / 230 VAC, 50 or 60Hz
• For shunt wound or permanent magnet motors
• 1/3hp at 90V, or 1/2hp at 180V armatures

Dimensions: 4″H x 4″W x 1.6″D (100 x 100 x 40mm)

Approvals: CE

Models 400, 800, 1200 & 1600 DC Drives (up to 3hp)

Standard Features:

• Linear torque control
• Armature voltage or tach feedback with IR compensation
• Calibration range switches (no component changes)
• Speed reference 0-10V or 4-20mA
• Maximum and minimum speed settings
• Adjustable current limit
• Independently adjustable up and down ramps
• 150% overload capacity with 30 second stall timer
• Stall and Zero Speed relay driver outputs
• Power fuse (up to 12 amps)
• Power on and stall indicator LEDs
• Stability adjustment
• Speed, Ramp Speed and Current signal outputs
• International supply voltages 110 / 230 VAC, 50/60hz
• Suitable for shunt wound or permanent magnet motors

Dimensions:

• Model 400: 5.2″H x 4.0″W x 1.6″D (130 x 100 x 40mm)
• Model 800: 5.2″H x 4.0″W x 2.8″D (130 x 100 x 70mm)
• Model 1200: 5.2″H x 4.0″W x 2.8″D (130 x 100 x 70mm)
• Model 1600: 6.1″H x 6.1″W x 3.4″D (150 x 150 x 85mm)

Approvals: CE, CSA

(See Enclosed Drives for NEMA 1 enclosed versions with Dynamic Braking and Reversing options)